Table of Contents
Advertisement
Installation Procedure
Close
4
Pop-up Drain with Cable
installation
1
Clean the cold/hot water supply pipes
dirt and debris in the cold/ hot water supply pipes
Before installation
must be washed out
2
Install the spout.
①Wipe dirt away around the instllation hole.
②Measure the installation holes,
select from the two kinds of packing
to suit your needs.
③Insert the packing through the
cold/hot water supply hoses into the
groove in the bottom of the main
faucet body and into the installation
hole.
④Insert the spout mounting flange, flat
washer, lock washer and nut through
the faucet mounting shaft in that
order, face the spout to from the front
and attach the parts.
3
Connect the
cold/hot flex
hoses
Section
Install the spout
2
5
Pop-up drain with cable.
(Only for faucet with
Pop-up drain).
1
Clean the cold/hot
water supply pipes
Important
Spout
Packi n g
Faucet mounting
shaft
Hot water supply
hose
spout mounting
flange
Flat washer
Lock Washer
Nut
Faucet mounting shaft
Cold Water
supply hose
6
Advertisement
Table of Contents
