Table of Contents
Advertisement
To use hot water, you must turn the handle
on the cold side first, then turn the handle
on the hot side slowly and adjust the
temperature.
When the valve at the hot side is opened,
hot water may cause scalding.
Before using hot water, check with your
hand that the temperature is appropriate.
Mandatory
When the handle on the hot side is turned, hot
water may cause scalding
After water is turned off, leave the handle
in turned off, leave the hand in the
coldside or in the middle.
The next time hot water is used, the hot water
remaining in the valve may cause scalding.
Check water leakage and looseness in
the pipe (cabinet and inspection hole
etc.) regular.
If the system has deteriorated or worn-out,
property damages, scalding and other injuries
may occur.
The pressure of the water supply can not
Do not
be lower than that of the hot water.
The hot water pressure must be lower than the
pressure of the cold water side.
If the hot water pressure is higher than that
of the cold water, you will not be able to adjust
the temperature normally, and you may be
scalded.
Warning
Ah!
No
No
looseness
leakage
Ah!
Slowly
2
Advertisement
Table of Contents
