Table of Contents
Advertisement
Specifications
Cold and hot
water pressure
Maximum use temperature
Suitable Water Quality
Suitable ambient temperture
Before installation
● If the water supply pressure is higher than 0.86MPa, you should buy
a reducing valve to reduce the pressure to the range of 0.2-0.3MPa.
To use the faucet comfortably, the recommended pressure is
about 0.2-0.3MPa.
●To prevent being scalded due to malfunction, the water supply
pressure must be higher than the hot water pressure, or you can
make them equal. In addition, if you inrease the pressure of the
hot water, it must still be lower than that of water supply side.
●To prevent being scalded due to malfunction, the
recommended hot water supply temerature is 140°F.
3
Minimum pressure
Maximum pressure
Supply Connection
Flow Rate
20psi ( 0.14MPa) (flowing pressure)
125psi (0.86MPa) (static)
Less than 185°F (85˚C)
Water that meets National/Primary
drinking water regulation
34～104˚F (2˚C～40˚C)
3/8" NPSM
Max. 2.2gpm (8.32L/min)
Advertisement
Table of Contents
