Compensator Assembly; Kick-Off Actuating Linkage - Cushman HAULER 800 2012 Technician's Repair And Service Manual

MECHANICAL BRAKES
B
Read all of Section B and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
B

Compensator Assembly

The compensator assembly contains a spring, which is
compressed until the stop tube within the spring is
engaged and the linkage becomes solid (Ref. Fig. 3 on
Page K-3). The brake compensator assembly applies a
spring load to the parking brake system and insures that
the parking brake remains under tension whenever it is
engaged.
Stop Tube
Spring
Fig. 3 Compensator Assembly

Kick-Off Actuating Linkage

The kick-off actuating linkage may require periodic
adjustment to compensate for the normal wear.
Replacement of any linkage components will also
require an adjustment.
Repair and Service Manual
Page K-3