If conditions are unfavorable and
the engine does not start after 10
pulls of the starter rope with the
choke set to e :
Set choke to g
g , pull the starter rope
g
g
5 times, move choke lever to e and
continue cranking.
If engine is warm:
:
Continue cranking until the engine
runs (choke lever on e).
BR 45
2
As soon as engine runs:
:
Move the setting lever (2) to the
lower stop so that the engine settles
down to idle speed.
If the engine stops during warm-up or
under acceleration:
:
Repeat starting procedure as
described under "If engine is cold".
Your machine is now ready for
operation.
english / USA
1
To stop the engine:
:
Move the stop switch (1) to $
If the engine does not start
:
Check that all settings are correct
(choke, throttle trigger in starting
throttle position, stop switch on I).
:
Repeat starting procedure.
17