P ractical H ints
Ash trays
To remove fro nt ash tray:
Pull ash tray out as far as possible.
Push down the spring (1) in the
center and remove ash tray.
To install ash tray:
Position ash tray squarely and push
in.
60
To remove rear ash tray:
Push the ash tray down while opening
and remove.
To install ash tray:
Position ash tray squarely and push
in.
Rear Seat Cushion
Removal: Depress buttons 1 (left and
right) and at the same tim e slightly lift
up rear seat cushion at the fro n t end
(do this carefully to avoid injury). Then
pull the cushion forward (Center arm
rest m ust be folded up).
Installation: Push rear of seat cushion
under seat back as far as it will go and
press down on the fron t section until
it engages.