Mercedes-Benz 300 D 1984 Owner's Manual page 27

Temperature Selection (° C)
The interior tem perature can be adjusted by turning
the tem perature selector wheel. The selected
tem perature is reached as quickly as possible and
maintained. A basic setting of 22° C/72° F is recom ­
mended. In order to avoid undesirable tem perature
fluctuations, a set tem perature should be readjusted in
small increments.
To override the autom atic climate control, turn the
tem perature selector wheel to either extreme end
position " M AX" or " MIN" .
" MIN" = Peak cooling perform ance: the system
operates mostly with recirculated air and a small am ount
of fresh air is added. If the fan control is set to
" AUTOM" , it will run continuously in speed No. 5.
" MAX" = Maximum heating performance. If the fan
control is set to " AUTOM" , it will run continuously in
speed No. 5.
Fan Setting
Selection fo r fan settings can be made as
§
follow s:
Push upper button fo r maximum fan speed (6th speed).
Push lower button fo r minimum fan speed (1st speed).
Push middle button (spring loaded) fo r autom atic control
o f air supply within 2nd through 5th fan speed range.
S etting @ = Always maximum fan speed.
Functions
(§ ) Off
In this setting, the fresh air supply to the interior of the
car is shut off, (to prevent entrance of odors, i.e. while
driving through tunnels, etc. or to prevent the entrance
o f water from autom atic car w ash). Use this setting only
tem porarily while driving.
A u to m a tic C lim ate C ontrol
25