Scan; Colour & Brightness - One for All 4 User Manual & Code Book

Scan

Your ONE FOR ALL 4 comes with a special Scan key
which lets you go through every programme available on
your Television, Video Recorder, Satellite Receiver or
Cable Converter.
For example, to scan through the programmes on your
Television:
Aim the ONE FOR ALL 4 at
1
TV
your Television and press TV,
then Scan. You will
automatically move through all
the programmes available on
SCAN
your Television stopping at each
programme for about three
seconds. Remember, the ONE
FOR ALL 4 must remain aimed
at your Television the entire
time you are using Scan.
When you find a programme that you would like to
2
watch, simply press the Scan key again to stop the
Scan feature.
To use Scan with your Video Recorder, Satellite Receiver
or Cable Converter, simply press the appropriate device
key (VCR or SAT) then Scan.
Note: Scan may not function with devices that did not
have a programme +/- key on the original remote.
Colour & Brightness
Depending on the functions of your original remote
control, the ONE FOR ALL 4 can operate the colour and
brightness settings of your Television.
To adjust the colour:
Press MAGIC followed by Volume+
(for colour up) or Volume- (for colour
VOL
down).
To adjust the brightness:
Press MAGIC followed by
Programme+ (for brightness up) or
CH C/P
Programme - (for brightness down).
15
All manuals and user guides at all-guides.com