PDMOVIE REMOTE AIR 4 User Manual page 10

3.Calibration
Press the OFF/ON button on the Bluetooth controller once, then press it again and hold, until the motor begins
running. The motor will then automatically calibrate the lens. Other calibration methods can be explained in
"Instruction Manuals Set Up
4.Use
Turn the handwheel of the Bluetooth controller to check the motor is running normally. (Note: The Bluetooth controller
can only control a single channel, so the receiver motor must be set to focus control: the focus indicator light is red)
Bluetooth Controller PDL-TC-AF Assigned Button Functions
Button Input Frequency
Residual electricity
100%-75%
74%-50%
49%-25%
24%-0%
5.REMOTE AIR APP
The motor can be controlled by the IOS system APP. Search PDMOVIE or REMOTE AIR, then download the APP
from Apple store.
ONE
1.Turn on the
AIR 4 controller
TWO
1.Turn on the
receiver motor
WWW.PDMOVIE.CO.UK
6 (2) or (3)" .
2.Initiate Bluetooth of phone
2.Initiate Bluetooth of phone
Function
TURN ON/OFF
Lens travel limit
Calibrate Lens
Activate Bluetooth
Switch Motor Direction
The color of the indicator light
WHITE
GREEN
YELLOW
RED
*
3. Turn on the APP
(Mobile automatic
connect the controller)
*
3. Turn on the APP
(Mobile automatic
connect the motor)
*
Before opening the App, make sure the App is not
already running. If so, close and reopen a single instance
of the App.
4.Use the AIR 4
controller to connect
the receiver motor
REMOTE AIR 4 User Manual
9