Basic Settings; Led Intensity; Lockout - Philips Lytemode 2-Button Remote Station User Manual

Basic Settings

LED Intensity

The LED intensity (brightness) may be set to four different levels.
To program:
Step 1. Press and hold TOP button for 3 seconds.
Step 2. While holding TOP button, tap BOTTOM button. LED
intensity will change.
Step 3. Tap BOTTOM button until desired intensity is reached.
Step 4. Release buttons to save setting.

Lockout

The 2-Button Remote Station can be "locked," which will prevent it
from sending commands. In this state, pressing either button will
illuminate both LEDs for 1 second, but will not transmit any
commands. The unit will continue to display proper ILS Master or
Room Combine status.
Lock/Unlock a station:
• Press and hold either button for 10 seconds.
6
Basic Settings