About the Lytemode Designer Suite System
The Lytemode Designer Suite System is designed to control architectural lighting by distributing
both power and intelligence. The system provides processing power and control at each respective
Pushbutton, Slider or Touch Screen Station, eliminating the need for a central processor.
Slider Stations provide individual control of up to 15 channels, as well as 8 dynamically programmable
pushbuttons to provide one-touch access to a variety of commands including: preset scenes, toggle on/
off, smart "matrix" commands, room link, raise, lower and more.
By combining Lytemode Designer Suite Slider Stations, Lytemode Designer Suite Button Stations and
Lytemode Designer Suite Touch Screens, the system provides remote access to scenes, master raise/
lower control, multi-room partition control, station lockout, toggle on/off, smart "matrix" commands,
Lytemode Designer Suite Stations are compatible with Lyteswitch, Capio Plus, Optio, and
Intelligent Raceway dimming systems, as well as Intelligent Power Systems (IPS) Dimmer Strips,
Dimmer Boxes, and Bak Pak dimmers.
Lytemode Designer Suite products are controlled by the Lytemode network protocol. All Lytemode
Designer Suite control devices must be connected to the system and given a unique ID (or address) in
order to interact properly. The ID identifies the device on the network and allows the device to avoid
network collisions when transmitting data.