Savin SLP 38c SLP38C SLP38C Maintenance Manual page 24

Replacing Consumables and Maintenance Kit
B Insert the Development Unit
along the rail, and push in
slowly until it stops.
1
C Holding
Unit, pull out the tape slowly
in a level manner.
Important
❒ Be sure to pull out the tape to
avoid printer malfunction
during operation.
❒ The removed tape is dirty.
Be careful not to let it get in
contact with your hands or
clothes.
16
ZDJH227J
the Development
ZDJH039J
I
Lower the inner cover slowly.
J
Tighten two screws using provid-
ed screwdriver.
Note
❒ Be sure to return the provided
screwdriver to its original posi-
tion on the inside of the front
cover.
K
Turn the light brown lever clock-
wise.
ZDJH018J
ZDJH019J
ZDJH020E