Free Motion Darning - Sunbeam Domestic 70 Operating Instructions Manual

Free motion darning

*The darning foot is an optional accessory not
supplied with your machine (to purchase call:
877-678-6232).
Set the machine as illustrated. Install the
embroidering plate. (1) Remove the presser foot
clamp. (2) Attach the darning foot to the presser
foot bar. The lever (A) should be behind the needle
clamp screw (B). Press the darning foot on rmly
from behind with your index nger and tighten the
screw (C). (3)
First sew round the edge of the hole (to secure the
threads). (4) First row: Always work from left to right.
Turn work by 1/4 and oversew. A darning ring is
recommended for easier sewing and better results.
35