Finishing Up - Sunbeam Domestic 70 Operating Instructions Manual

Finishing up

Reverse sewing
Reverse sewing is used for locking the end of
seams and where reinforcement is needed.
At the end of seam, press down the reverse
sewing lever and touch the foot control
lightly. Sew a few reverse stitches. Release
the lever and the machine will sew forwards
again. (A)
Removing the fabric
Turn the handwheel towards you to bring
the thread take up lever to its highest
position. Raise the presser foot and draw the
fabric away from you.
Cutting the thread
Hold the threads behind the presser foot.
Using both hands, guide them to the slit (B)
at the rear of the presser bar and press down
to cut the thread. You can also use the thread
cutter on the side of the machine.
19