Sewing With The Hemmer Foot - Sunbeam Domestic 70 Operating Instructions Manual

Sewing with the hemmer foot

*The hemmer foot is an optional accessory not
supplied with your machine (to purchase call:
877-678-6232).
For hems in ne or sheer fabrics.
Set the machine as illustrated. Pattern selector
on "A".
Neaten the edge of the fabric. At the beginning
of the hem, turn under the edge twice by about
3mm (1/8") and sew 4-5 stitches to secure. Pull
the thread slightly towards the back. Insert the
needle into the fabric, raise the presser foot and
guide the fold into the scroll on the foot. (1)
Gently pull the fabric edge towards you and
lower the presser foot. Begin sewing, guiding
the fabric into the scroll by holding it upright
and slightly to the left. (2)
30
30