Threading The Upper Thread - Sunbeam Domestic 70 Operating Instructions Manual

Threading the upper thread

CAUTION:
Before threading, turn power
switch to (O ) "0".
Raise the needle bar to its
highest position. Follow exactly
the numbered threading
sequence illustrated below. If you
skip a step or fail to properly
engage the thread in any of the
thread guides, the machine will
not sew properly. (1-5)
Continue to draw the thread
down and into the needle bar
thread guide. Insert the thread
through the eye of the needle
from front to back. Leave about
10cm (4") of thread loose behind
the needle. (6)
a. Spool pin
b. Spool holder
15