Zippers And Piping - Sunbeam Domestic 70 Operating Instructions Manual

Zippers and piping

Set the machine as illustrated. Dial selector on "A".
Set stitch length control between "1" - "4"
(according to thickness of fabric).
The zipper foot can be inserted right or left,
depending on which side of the foot you are
going to sew. (1)
To sew past the zipper pull, lower the needle into
the fabric, raise the presser foot and push the
zipper pull behind the presser foot. Lower the
foot and continue to sew.
It is also possible to sew in a length of cord, into a
bias strip to form a "welt". (2)
29