John Louis Home JLH-521 Installation Instructions Manual page 8

7. Align bracket under 2nd vertical support at top shelf.
8. Repeat angle bracket installation steps.
7
STEP 9 - Installing 24in. Shelves
1. Select desired location on vertical support bar for shelf.
2. Secure L-clip to vertical support bar using #6 3/4 in. screw.
3. Repeat for same location on 2nd vertical support bar.
1
4. Place 2 ft. shelf onto L-clip.
5. Hold in position & level shelf front to back
6. Draw a level line on wall at bottom of shelf rail.
7. Remove shelf.
4
6
7
8
2
5
7
8. Line inside bottom of L-clip hardware with level line.
9. Mark hole locations.
10. Secure using #8 1 1/2 in. screws (use wall anchors if no stud is present).
11. Place shelf into clips.
12. Secure shelf to hardware using #4 3/4 in. screws.
13. Repeat for all desired shelf locations.
8
10
12
9
11
13