HDL -MP8B-RF.18 User Manual page 20

then the mesh gateway needs to enter the wireless setup mode also.
Upgrade steps:
1- Press the 'PROG' button of wireless gateway 3 times continuously to enter the
wireless setup mode.
P
2- ower off the multi-function wireless panel then keep pressing the programming
button (the last two button) when power on it, it will enter the wireless setup mode, and
you will be able to read its ID in the "Device" line.
3- Select .bin firmware , click "Upgrade".
4- Upgrade finished.
5- Press the 'PROG' button of wireless gateway 1 time to exit the wireless setup mode.
Multifunctional Wireless Panel – User Manual
User Manual
HDL-MP8B-RF.18
17