Test The Switch; Channel Setting - HDL -MP8B-RF.18 User Manual

User Manual
HDL-MP8B-RF.18
Infrared receiving function status
Enable/disable the IR receiving function (accept HDL remote controller only)
Minimum dimming value
Set the dimming lower limit.
The Lower limit is useful if you would like to skip the low level segment and dim from a
certain level, say 40%. You want to skip it because maybe lower than 40% is impractical
for you or maybe the load quality is not so good and trembles when at low level segment.
Long press time
Set time for long-press, define the long press by end-user.
Double click time
Set time for double-click, define the double click by end-user.

6.2.8 Test the Switch

Test the key function in the software, equal to press the physical button.

6.3 Channel Setting

Each power interface has 3 output channels, up to 4 power interfaces can be connected in
parallel, then there are 12 channels in total. The panel will assign the dimmer address1-4
for the connected power interfaces by default. User can control the outputs by 'On/Off'
12
Multifunctional Wireless Panel – User Manual