Danmeter CSM 2 User Manual page 27

Cleaning
Clean the monitor periodically by wiping the outer case with a lint-free cloth lightly moistened with
warm water and a mild, non-abrasive cleaning solution or 70% isopropyl alcohol.
Note
The monitor case is resistant to the following cleaning solutions:
•
Renu-klenz 16ml/L (Steris corp., USA)
•
Vesphene Iise 8ml/L (Steris corp., USA)
•
Warm water
•
Isopropyl alcohol 99%
•
Acetone 10%
•
Hydrogen peroxide 3%
Same solutions can be used for cleaning the patient cable.
Storage
If the monitor is to be stored for a longer period, it should first be cleaned and the battery removed.
Store in a clean, dry atmosphere at room temperature and, if available, use the original packaging
for protection.
Fuses
Caution:
No user- replaceable fuses in the monitor or CSM power
Disposal
The monitor should be disposed of taking into consideration environmental factors, local laws and
regulations. All components can be safely disposed of in the approved manner as per hospital or
locally regulated guidelines.
Remove battery, if any, before disposal.
Test Routines
Refer to guide for biomeds.
Cerebral State Monitor - CSM DFU Page 23