Settings - Danmeter CSM 2 User Manual

Settings

4.7
Parameter Menu
High Alarm Alarm
Low Alarm Alarm
High Limit Alarm
Low Limit Alarm
Language Config
Contrast Config
RF interface Config
Set clock Config
Back light Config
AutoLNK Config
The AutoLNK function
When AutoLNK is set to Inactive:
- active CSM Link(s) within range will pop-up in the Link display. Select the CSM Link serial
number you would like to connect to.
When AutoLNK is set to Active:
- active CSM Link within range will automatically be connected to CSM monitor
When AutoLNK is set to SN:
- CSM monitor automatically connects to the dedicated CSM Link if within range.
Cerebral State Monitor - CSM DFU
Description
Selects the CSI Alarm High Option
Selects the CSI Alarm Low Option
Selects the CSI High Alarm Level
Selects the CSI Low Alarm Level
Selects device language
Selects display contrast
Select radio link active. If turned
OFF the link is completely inactive.
Sets clock: Date Format, Year,
Month, Date, Hours, Minutes,
Seconds
Sets display light and light
brightness
Automatically establishes a
wireless link to any CSM link within
approx. 10 feet or to a specified
CSM link.
Values (Default)
ON/OFF (OFF)
ON/OFF (OFF)
2-99
(60)
1-98
(40)
English
15-35
(20)
ON/OFF (ON)
0 = Off
1 = Normal (1)
2 = Bright
Inactive/Active/SN
(Inactive) SN is
only displayed if
link is established
Page 10