Expansion Slot; Installing An Expansion Card To The Riser Card Bracket - Asus RS500-E9 Series User Manual

2.5

Expansion slot

2.5.1

Installing an expansion card to the riser card bracket

The barebone server comes with a riser card bracket. You need to remove the bracket if you
want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
1. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x24 slot on the
motherboard.
2. Place the riser card bracket on a flat
and stable surface, then remove the
screw from the slot bay.
3. Install a PCI Express x8 or x16 card
to the bracket as shown.
4. Secure the card with a screw.
ASUS RS500-E9 Series
1
Q-Code
1
Q-Code
2
4
3
1
5
2-13