Asus RS500-E9 Series User Manual page 41

3. Select the slots that are going to
be used for your Mezzanine card,
then use a screwdriver and pry the
corresponding slots until it pops off.
4. Prepare your Mezzannine card and the signal cable. Connect the signal transmission
end (white) to the AUXLED_CON header on the card.
AUXLED_CON1
5. Insert the ports of the Mezzanine card into the mounting hole on the chassis, then insert
the golden connector of the Mezzanine card into the MEZZPCIE1 (OCP) connector on
the motherboard.
Ensure that the stand screws on the motherboard is aligned and matched to the screw
holes of the Mezzanine card.
Screw holes
ASUS RS500-E9 Series
LAN ports
LAN port slots
Stand screws
2-21