Event Logs Menu; Change Smbios Event Log Settings - Asus RS500-E9 Series User Manual

P0 TotalTimeThreshold Low [23]
The HW switching mechanism DISABLES the performance setting (0) when the total
P0 time is less than the threshold set.
Configuration options: [0] - [99]
P0 TotalTimeThreshold High [3a]
The HW switching mechanism Enables the performance setting (0) when the total P0
time is greater than the threshold set.
Configuration options: [0] - [99]
5.7

Event Logs menu

5.7.1

Change Smbios Event Log Settings

Press <Enter> to change the Smbios Event Log configuration.
All values changed here do not take effect until computer is restarted.
Enabling/Disabling Options
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Configuration options: [Disabled] [Enabled]
Erasing Settings
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation
during reset.
Configuration options: [No] [Yes, Next reset] [Yes, Every reset]
5-38
Chapter 5: BIOS Setup