Cornelius ED300 Installation Instructions

INSTALLATION INSTRUCTIONS

ED300 I
CE
Item No. Part No.
1 29505
2 22127
3 50904
620064177
4
620065192
5 91957
6 620042919
7 620701601
8 620701902
9 620701901
10 620701903
11 08027TEINS
12 43164
13 70100
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer's instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
The dispenser must be secured with 3/8 X16 bolts (6) to the counter before installing the ice maker adapter kit. Refer
to the installation manual and for the counter mounting template.
NOTE: Adjust the automatic agitation timer located in the dispenser's electrical control box to 5 sec-
onds on, 20 minutes off. Access to the timer is provided by removing the merchandiser/upper
front panel.
1. Remove the top plastic bin covers (2) from the dispenser.
2. Place the Adapter lid assembly (item 1) on top of the dispenser and position it flush with the rear and sides
of the dispenser as shown in Figure 1.
3. Install the ice baffle on the lid assembly as shown in .
Revision Date: July 05, 2016
© 2016, Cornelius Inc.
M A
AKER DAPTER
P/N 08030TE
Table 1. Loose Shipped Parts
Lid Assembly
Ice Maker Mounting Bracket
RTV, 3 oz. Tube
Lid & Lanyard assembly ED300 Black (08027TE)
Lid & Lanyard assembly ED300 Grey (08030TE)
Label, "Disconnect Power Before Cleaning"
ED300 Ice Baffle
Screw TF SM 10-16 PNPH 16SS
#8-32 Nylon Acorn Nut
Sealing Washer
#8 Nylon Washer
Installation Instructions
Screw MA 08-32 TRPH 10 SS
Nut HEX 08-32 SS Nylok
www.cornelius.com
ED300 Ice Maker Adapter Lid Installation Instructions
L K P/N 08027TE
ID FOR ITS
Name
- 1 -
AND
Qty.
1
2
1
1
1
1
12
4
4
4
1
2
2
Revision: A
Publication Number: 08027TEINS