Cornelius P/N 629088733 Installation Instructions

Idc icemaker adaptor kit

Download this manual

INSTALLATION INSTRUCTIONS

IDC I

CEMAKER

WARNING:

Disconnect power to the unit before installing adaptor following all lock out / tag out procedures established by the

user. Verify all of the power is off to the unit before performing any work. Failure to comply could result in serious

injury, death or damage to the equipment.

WARNING:

All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in

serious Injury, Death or Damage to the equipment.

Revision Date: August 3, 2010

DAPTOR

IT FOR

www.cornelius.com

IDC Icemaker Adaptor Kit Installation Instructions

P/N 629088733

FIGURE 1

- 1 -

Icemaker

Adaptor kit

Bar

Revision: B

Publication Number: 629088733INS

Page 1: Installation Instructions
All of the attachment screws and plates must be installed as directed in this manual. Failure to comply could result in serious Injury, Death or Damage to the equipment. Revision Date: August 3, 2010 © 2006-2010, IMI Cornelius Inc. IDC Icemaker Adaptor Kit Installation Instructions P/N 629088733...
Page 2 ICE MAKER SUPPORT RAIL Place ice maker support rail into the front set of pockets in the ice bin as shown in Figure 2. Publication Number: 629088733INS FIGURE 2 - 2 - © 2006-2010, IMI Cornelius Inc.
Page 3 Apply continuous bead of NSF international (NSF) listed silastic sealant (Dow 732 or equivalent), supplied in kit, to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped away immediately. © 2006-2010, IMI Cornelius Inc. IDC Icemaker Adaptor Kit Installation Instructions FIGURE 3...
Page 4 (just enough to go through). Secure the two brackets using the screws provided. For optimal performance, do not fill the ice bin more than 2/3 capacity (maximum fill is 4” below the top of bin) Publication Number: 629088733INS DETAIL “A” DETAIL A FIGURE 4 - 4 - © 2006-2010, IMI Cornelius Inc.

629088733