Olympia ProHome series Operating Manual page 37

You must connect your base unit with your network:
1
Start up the ProHome app on your smartphone or
tablet.
2
Read the instructions carefully and tap on Continue
until your device's camera is activated.
3
Use your smartphone or tablet to scan the QR code
on the rear of the base unit.
If you can not scan the QR code, tap on Manual
input of the UID and manually enter the following
data from the rear of the base unit:
• UID
• Password
• SSID
INSTALLING THE PROHOME APP
O P H
37
LYMPIA RO OME