Table of Contents
Advertisement
(Press repeatedly)
You will see the command (Line#3) and a short explanation (Line#4). If you wish to operate the indicated command,
press
To see the FULL list of commands:
Type
Type
and repeat above procedure. If you hear a loud beep after pressing enter, you've entered the wrong
password.
Function keys: They serve as a shortcut to the keyboard commands. The following function keys are used:
F1
Mass entry
F2
Sample Identification
F3
Group Identification
F4
Spike Mass
F5
Balance Mass
F6
Open Lid
F7
Vessel User Test
F8
Terminate User Test
F9
CAL3K_AP User Test
F10
Subject Help
MASS ENTRY
The mass is a weight in the range 0.2 to 1.5 Gramm. The limits can be set via a PC to suit your
operation. Once it is entered it is 'LOCKED' in to the present operation until it is ignited. The only way
to 'ERASE' the mass or 'UNLOCK' it is as follows:
CAL3K-AP INSTALLATION GUIDE V1.5 |
Manufacturers of CAL2K/CAL3K Oxygen Bomb Calorimeters
(PASSWORD will be displayed on screen), now press
(DDS3K or your current password) and press
(F1,Enter,0.xxxx,Enter)
(F2,Enter,mysampleId,Enter)
(F3,Enter,MyGroupId, Enter)
(F4,Enter,0.xxxx,Enter)
(F5,Enter)
(F6,Enter,Y,Enter)
(F7,Enter)
(F8)
(F9,Enter)
(F10) Read display!
www.ddscalorimeters.com
DDS CALORIMETERS
www.ddscalorimeters.com
| calo@ddsystems.co.za
Advertisement
Table of Contents
