Akai FMT-06BT Operating Manual

FMT-06BT
Operating Manual of Bluetooth Car Charger
Thanks for purchasing our product! Please read this operating
manual carefully before using in order to ensure correct use and
proper functions!
1. Introduction of the Product
This product is a special Bluetooth car charger with MP3 player,
adopts professional high-performance Bluetooth module,
built-in MP3 decoder chip that can transmit music files inside
the USB disk to car stereo via wireless, and can switch an
incoming call to the hands-free state as long as your mobile
phone is provided with the Bluetooth function. When the call is
finished, it will be switched to the music play automatically. It
can also send the music in your phone to your car sound
wirelessly. You can enjoy the music and answer the call in
hand-free mode without refitting your car, which ensure the
driving safety while enjoying music.
2. Schematic Diagram of Appearance
3. Descriptions of the Schematic Diagram
1. Volume up/down, / CH+ CH-
2. Power indicator lamp
3. Audio output hole
4. The frequency display / car battery voltage display / load
current display
5. Answer/redial/Play, Pause
6. Microphone
7. Hang up/CH Mode
8. LED display window
9. Power adaptor 12V-24V
10. Support USB Play / Support two-way plug USB
11. Two USB, total output 5V / 2 .1A (maximum)
12. Support charging intelligent recognition/Support two-way
plug USB (it is recommended to charge the device, using this
USB interface)
4. Product Features
1. Any angle adjustable, and applicable for all types of vehicles
2: FM transmitter
3: LED display window
4: Support audio output
5: Supports car battery voltage display / load current display
6: Supports playing music by USB disk
7: Supports MP3 music format
8: Answer/hang up/reject/redial the via Bluetooth
9: Bluetooth stereo music play
10: Call Echo Cancellation and Noise Reduction (CVC)
technology
11: Dual USB output voltage, provides powers to other devices
up to 5V/2.1A
12: Automatic memory function of power failure frequency
point
13: Support USB charging intelligent recognition
14: Support two-way plug USB
5. Operation Instructions
5.1 Bluetooth mode
5.1.1 Plug the product into cigarette lighter socket and switch
the power to ON. The product will start up and LED will display
the frequency point once it is powered.
5.1.2 If your phone is connected to Bluetooth hand-free for the
first time, match connection is required.
5.1.3 Enable the Bluetooth function of your phone while the
Bluetooth hands-free is on and search the "Car kit" device,
which will display on your phone.
5.1.4 Select "Car kit" and pairing will be automatically done. A
prompt sound will be given after pairing.
5.1.5 Making a call
Dial the number by pressing the phone number under
connection state and the sound will be given out from car
audio.
5.1.6 Answering a call
If there is an incoming call under the connection state, press
key to answer the call. In answering the call, press
to switch between the mobile phone microphone and the
product microphone. Press key to hang up.
5.1.7 Call back
In the connected state, continuous double press
last number dialed.
5.1.8 Reject a call
For the call you do not want to answer, you may press
key to reject.
5.1.9 Play music in your phone
This product supports A2DP function, which allows you to play
music in your phone. Music will be transmitted to your car
audio via FM function of the product so that you can enjoy
music with higher quality. Press
press for the next/last song (note: some phones with
lower system version may not support this function).
5.2. USB playing mode
5.2.1 Plug the device into car cigarette lighter socket, the player
detects songs inside U disk and play automatically. Press
buttons to play next or previous songs, shortly press
to play / pause. Long press
flashes, shortly press
increase/decrease.
5.2.2 Open the car stereo to FM radio state, adjust the device
transmission frequency same as reception frequency of car
radio, then can play music from the car stereo.
5.2.3 Adjust the transmission frequency: long press
enter the selected frequency state, then the digital frequency
flashes, shortly press "+" "-" key to achieve FM frequency
increase/decrease.
Hold "+" "-" key to increase/decrease the frequency quickly.
Frequency is adjustable within 87.5 - 108MHZ.
5.2.4. It has dual USB ports (Only #10 in diagram on Page 1 can
read U-DISK; the maximum output current is 5V/2.1A.When dual
ports are used at the same time, the total current is no more
than 2.1A; When using one port to play the music from U-DISK,
the other port can also charge devices.
5.3 Audio output mode
5.3.1 Inserted into attached audio cable, one end is inserted
into the audio output hole of the product, and the other end is
key
Back to the
key to play/pause and
button, digital frequency
to FM frequency
to