Akai FMT-06BT Operating Manual page 2

inserted into Input-terminal the other equipment, and the
audio signal of the product can be transmitted to other
equipment through the audio line.
Reminder: when the audio output port is inserted into the
audio line, the sound of the machine's transmit is silent mode
by default, pull out the audio line, machine auto-recovery the
transmit sound.
5.4 Switch the Bluetooth mode and U-disk mode
Long press to switch the Bluetooth mode and U-disk
mode. U-disk not inserted, it cannot switch U-disk mode.
Notice: Wait for 10s after turning on BC-06D,
then can switch by pressing
5.5 Car battery voltage display mode:
When switch to the U / I(Voltage/current), the display shows
the car battery voltage. (Voltage display range: 9-30V, over
range display HHH; error ± 1V)
Tips: Voltage displayed on device is operating voltage, when it
lower than 12V, display flashes; please check if the battery
voltage is normal to avoid car not start caused by battery
fault.
5.6 Load current display mode:
The switch to the U / I(Voltage/current), connect the load,
Scrolling displays the load current / car battery voltage. (Load
current is less than 0.13A does not display. Error ± 0.1A)
5.7. Charging intelligent recognition
When plug the USB connector to the charging port (#11 in
diagram), it can recognize the device type intelligently and
provide max charging current so that can save charging time.
6. Power-off memory
Each time you power off this product, the system will memorize
the information like the FM frequency and the song you are
playing . And when you use it next time, the song will continue
being played. But when you remove or change the storage or
the system detects the wrong status, the system will play the
first song.
7. Technical Parameters
Rated working voltage 12V-24V
Limit working voltage 9 ~ 26V
USB output 5V/2.1A
Working temperature 0~50
Charging intelligent recognition support
Play format MP3
Battery voltage display accuracy Error ±1V
Load current accuracy Error ±0.1A
SNR >60dB
Degree of distortion <0.1%
Frequency response 20Hz-15Khz
Resolution of right and left >60dB
channel
Bluetooth version Version 3.0+EDR
Bluetooth sound processing A2DP
Distribution
function supported
Bluetooth transmission distance less-than 10M
Effective distance of Bluetooth 0.5-2M
microphone
FM frequency 87.5~108Mhz
FM Mode Stereo
frequency locking
8. Attentions
1. This product contains dual USB outputs, both support
two-way plug USB I t can charge two devices at the same time
，
with the maximum output of 5V/2.1A.
2. There is only one port which is showed in the picture on page
1
3. In insert U disk and Bluetooth is turned on, then boot priority
Bluetooth connection (after 17 seconds no Bluetooth pairing is
successful, automatically switches to the U disk mode); when
the Bluetooth connection on and then insert U disk, the latter
takes precedence.
4.Never turn the volume to be too loud when FM is working so
as to avoid the sound distortion. Please adjust the sound
volume through the car audio.
5. A built-in antenna is provided for the product, so please avoid
using the broadcasting station frequency that is with strong
signal so as to get better sound effect.
6. The method to operate the Bluetooth may differ due to the
difference of the phones applied.
7. Some phones may not support automatic connection if they
are powered on after the power failure. If so, please connect
them by hand.
8. This product is compatible with more than 95% phones on
℃
the market but some are still incompatible. Please pay attention
to it when purchasing our product.
9. The volume should be proper during the call to avoid
affecting the other party.
10. Do not use this product in the environment with high
temperature, dusts or moisture.
11. Avoid dropping the product to prevent damage to the
surface or the body.
12. The Bluetooth of this product supports background play. If
there is a prompt tone when playing music with U disk, it will be
automatically switched to the Bluetooth mode. It will return to
U disk mode after ending the cue tone or call.
(Advance Audio
13. The buttons #5 and #7(refer. Diagram in page 1) cannot be
Profile)
pressed together or it will be dysfunctional.
9. Accessories attached
1. Operating manual 2. Line in cable 3. Package
DISPOSAL OF WASTE ELECTRICAL AND ELECTRONIC
digital PLL
Request additional information from the store where you
purchased the product.
EQUIPMENT
This symbol on the product or packaging
means that the product should not be
treated as household waste. Do not throw
garbage at the end of its life, but take it to a
collection center for recycling. In this way
you will help to protect the environment and
be able to prevent any negative
consequences that it would have on the
environment and human health.
To find your nearest collection center:
- Contact local authorities;
- Access the website: www.mmediu.ro;