Operation Paneldisplays - SATO CL608e/CL612e Service Manual

Section 1. Overview and Specifications
Operation Panel/Displays
VR1 (Print)
VR2 (Offset)
VR3 (Pitch)
VR4 (Display)
*NOTE: Optional RS232 Communication Card contains DSW1 switches which
are configured when supplied with the printer.
Page 1-6
POTENTIOMETERS
To adjust print darkness (fine adjustment).
To adjust amount of back/forward feed for dispenser/cutter/tear-off
bar position (+/- 3.75).
To adjust home print position of the label (+/- 3.75 mm).
To adjust the contrast of the LCD display.
*DSW2 & DSW3
SATO CL608e/CL612e Service Manual
Dip Switches used to set operational
parameters of printer. Refer to Section
2 for settings.
PN 9001079
Rev. B