Replacing The Power Supply - SATO CL608e/CL612e Service Manual

Section 6. Replacement Procedures

Replacing the Power Supply

REMOVE (2) SCREWS AND PULL
AWAY TO DETACH IF INTERFACE
CARD IS INSTALLED
Figs. 6-8
REMOVE (2) SCREWS
Fig. 6-9
REMOVE (2) SCREWS
Fig. 6-10
TO DETACH MAIN
REMOVE (2) SCREWS
CIRCUIT BOARD
Page 6-10
SATO CL608e/CL612e Service Manual PN 9001079
Rev. B