Assembly - Grizzly G7944 Owner's Manual

7.
With help of an assistant, place drill press on
base plate.
8.
Position drill press close to front of mobile
base, so mobile base will not become a trip-
ping hazard.
9. Mount drill press to base plate with lag bolts
and flat washers, as shown in Figure 11, or
with through bolts, flat washers, and hex nuts.
x 4
Figure 11. Drill press bolted to mobile base,
using lag bolts and flat washers.
-20-

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
The column must be secured on the base to prop-
erly assemble your drill press.
To assemble the machine:
1.
Place column on base and align mounting
holes.
2.
Secure column to base with (4) hex bolts, as
shown in Figure 12.
Figure 12. Column secured to base.
Model G7943/G7944 (Mfd. Since 09/17)
x 4