Program & Customize; Custom Help - Sharp R-CD1800M Operation Manual

Program & Customize

Custom Help

You can check your oven setting and customize
your oven by changing CUSTOM HELP setting.
The CUSTOM HELP pad has 11 operations.
1. Selecting Memory Input method
2. Selecting Auto Start Operation
(for Direct Input and Repeat Input)
3. Program Lock Setting
4. Cooking Completion Sound Volume Setting
5. Cooking Completion Signal Setting
6. Memory Cook Data Check
7. Total used Counter Check/Clear
8. Air Filter Counter
9. Selecting Operation in case of Magnetron
Failure
10. Multiplication setting for X2/X3 with memory
cooking
11. Express Defrost Setting
To use Custom Help function, press the CUSTOM
HELP pad twice within 2 seconds, and desired
option pad. And then follow each instruction
below.
NOTE : No audible signal will be heard when the
CUSTOM HELP pad is fi rst pressed.
1. Selecting Memory Input method
Your oven has 3 ways to select memory number.
CH11 : Direct Input (100 memory banks) = Factory
Setting
CH12 : Direct Start (10 memory banks)
CH13 : Repeat Input (30 memory banks)
To set the 3 ways
Press the CUTOM HELP pad twice within 2 seconds
then enter the number 1,1 for Direct Input
1,2 for Direct Start
1,3 for Repeat Input
and then press the START pad and the STOP/
CLEAR pad to exit from the Custom Help function.
*Suppose you want to set Repeat Input.
Procedure
1 Press the CUSTOM HELP
CUSTOM
x 2
pad twice within 2 seconds.
HELP
2 Enter desired setting.
1 3
(Ex. Enter 1, 3 for
Repeat Input.)
3 Press the START pad to
START
save the setting.
4 Press the STOP/CLEAR pad
STOP
to the STOP CLEAR pad to
CLEAR
exit from the Custom Help
function.
2. Selecting Auto Start Operation
(for Direct Input and Repeat Input)
Your oven has 2 ways to start memory cooking.
CH21 : Auto Start OFF = Factory Setting
CH22 : Auto Start ON
Auto Start allows you to start memory cooking
without pressing the START pad.
To set the ways
Press the CUSTOM HELP pad twice within 2 seconds
then enter the number 2, 1 for Auto Start OFF
and then press the START pad and the STOP/CLEAR
pad to exit from the Custom Help function.
3. Program Lock Setting
You can select Program Lock ON or OFF
CH31 : Program Lock OFF = Factory Setting
CH32 : Program Lock ON
The program Lock keeps your customized setting.
In the Program Lock ON, the LOCK indicator appears
when you press the CUSTOM HELP pad twice
within 2 seconds. And you can not change any
setting.
To set the desired Program Lock setting,
Press the CUSTOM HELP pad twice within 2 seconds
then enter the number 3, 1 for Program Lock OFF
and then press the START pad and the STOP/CLEAR
pad to exit from the Custom Help function.
NOTE : If you select Program Lock OFF, the LOCK in-
dicator disappear when you press the START pad.
Operation when Program Lock ON is set
KEY Custom Help Title
Operation
1 Selection Mamory Input Method
2 Selection Auto Start Operation
3 Program Lock Setting
4 Volume Setting
5 Cooking Completion Signal
Setting
6 Memory Cook Data Check
7 Total Used Counter Check/
Check
8 Air Intake Filter counter
9 Selection operation in case
of Magnetr on Failure
x2/x3 Multiplication setting for
x2/x3
EXPRESS Express Defrost setting
DEFROST
SET Memory cook data setting
MEMORY
11
2, 2 for Auto Start ON
3, 2 for Program Lock ON
When Program Lock
ON is set
no operation
no operation
operation
no operation
no operation
operation
check : operation /
clear : no operation
check,clear : operation /
set : no operation
no operation
check : operation /
set : no operation
check : operation /
set : no operation
no operation