D-Link DSM-510 Quick Install Manual page 17

Select the Encryption Type and
the Cryptography Key to configure
your wireless settings. Once you've
completed all of your settings,
please click OK.
Click OK
If you need to manually configure
the IP Settings, click the IP Address
Settings button. You will see a new
screen appear.
Click OK
To manually enter the IP address information, select NO from Get IP
Address and press the ENTER button on your remote control. The
navigation arrows on your remote control will allow you to select the
corresponding field that needs to be updated. Press the ENTER button
on your remote control to select the field and use the number keys
to input the information. Press ENTER when you have completed
entering the information. Click OK after you've finished updating the
IP Address Settings screen.
Please return to your PC to complete the addition of your device.
1
Please continue to page 19.
D-Link DSM-510 Quick Install Guide