Configuring Motion Detection Recording And Capture - Grundig GD-RN-AC2004P User Manual

5.3 Configuring Motion Detection Recording and Capture

Follow the steps to set the <Motion Detection> parameters. In the <Live View> mode, once a
<Motion Detection> event takes place, the NVR can analyze it and do many actions to handle it.
Enabling the <Motion Detection> function can trigger certain channels to start recording or trigger
<Full-screen Monitoring>, <Audio Warning>, <Notify the Surveillance Center> and so on. In this
chapter, you can follow the steps to schedule a record which is triggered by the detected motion.
Steps:
1. Enter the <Motion Detection> interface: Menu>Camera>Motion
2. Configure <Motion Detection>:
1) Choose the camera you want to configure.
2) Check the checkbox after <Enable Motion Detection>.
3) Drag and draw the area for <Motion Detection> by mouse. If you want to set the
<Motion Detection> for all of the area shot by the camera, click <Full Screen>. To clear
the <Motion Detection> area, click <Clear>.
4) Click <Settings> and the message box for <Channel Information> pops up.
5) Select the channels which you want the <Motion Detection Event> to trigger for the
recording.
Motion Detection
Motion Detection Handling
86