Region Exiting Detection; Unattended Baggage Detection; Object Removal Detection - Grundig GD-RN-AC2004P User Manual

10.6 Region Exiting Detection

The <Region Exiting Detection> function detects people, vehicles or other objects which exit
from a pre-defined virtual region and certain actions can be taken when the alarm is triggered.
Note:
Please refer to the Chapter 9.5 Region Entrance Detection for operating steps to configure the
<Region Exiting Detection>.
Up to 4 rules can be configured.

10.7 Unattended Baggage Detection

This function is not available in all models.
The <Unattended Baggage Detection> function detects objects left behind in the pre-defined
region such as baggage, a purse, dangerous materials, etc. and a series of actions can be
taken when the <Alarm> is triggered.
Note:
Please refer to the Chapter 9.4 Intrusion Detection for operating steps to configure the <Unattended
Baggage Detection>.
The <Threshold> [5s-20s] in the <Rule Settings> defines the time for which an objects is left
behind in the region. If you set the value as <10>, then the <Alarm> is triggered after the object was
left and has stayed in the region for 10 seconds.
The <Sensitivity> defines the similarity degree of the background image. Usually, when the
sensitivity is high, a very small object left in the region can trigger the alarm.
Up to 4 rules can be configured.

10.8 Object Removal Detection

This function is not available in all models.
The <Object Removal Detection> function detects the objects removed from the pre-defined
region such as the exhibits on display and a series of actions can be taken when the <Alarm>
is triggered.
156