Timeguard LEDPROFOB Installation & Operating Instructions Manual page 4

4. Battery
• To access the battery holder, remove the back plate
from the fob as shown in the diagram.
5. Pairing the RF Remote
3
Fob(s) with the PIR Light
Controller
Note: Please refer to the operating instructions that
came with the SLB-W2300FR or LEDPRORFKB-WH
products you are using, and ensure you have
completed the Walk Test Procedures before you
can pair the devices. The pairing of the fob(s)
cannot be actioned with a PIR light controller set
to Test Mode. Make sure the PIR light controller
is functioning correctly and set for Automatic
Operation (Auto Mode) before you continue.