Safety Instructions - GE Digital Energy LP 33 Installation Manual

Digital Energy™
Congratulations on your choice of a LP Series Uninterruptible Power Supply (UPS).
It will help eliminate load disturbances due to unexpected power problem.
This Installation Guide describes how to prepare the installation site, and it
provides weight and dimensions and procedures for moving, installing and
connecting the UPS.
While every care has been taken to ensure the completeness and accuracy of this
manual, GE assumes no responsibility or liability for any losses or damages
resulting from the use of the information contained in this document.
WARNING!
LP 33 / 10 and 20 kVA, is a product that needs to be installed by a licensed and
knowledgeable contractor.
We recommend that this manual be kept next to the UPS for future references.
If any problems are encountered with the procedures contained in this manual,
please contact your Service Center before you proceed.
This document shall not be copied or reproduced without the permission of GE.
Some of the information contained in this manual may be changed without notice
to reflect technical improvements.
Read the safety instructions contained on the following pages carefully before the
installation of the UPS, options and battery system.
Pay attention to the rectangular boxes included in the text:
They contain important information and warning concerning electrical connections
and personnel safety.
OPM_LPS_3UI_10K_20K_0US_V010.doc
Preface

Safety instructions

Parallel version secured with RPA
When included in the text, this symbol refers to
operation needed only for parallel system.
4/38
g
Installation Guide LP 33 / 10 - 20 kVA