GE Digital Energy LP 33 Installation Manual page 18

Digital Energy™
Included in the delivery you can find the following parts:
• An accessories bag.
• Control Bus cables (only for RPA system).
• CD-ROM connectivity.
Adjustable foot to block and support the LP 33
Fig. 3.6-2 Bolts to block the LP 33 on it's position
NOTE !
The wheels are designed only for limited movements on the installation
site.
NOTE !
A damaged UPS must never be installed or connected to utility or battery!
In case of any damage sustained during the transport, immediately inform the
shipping agent!
A detailed report of the damage is necessary for any indemnity claim.
Packing material recycling
GE, in compliance with environment protection, use only environmentally
friendly material.
UPS packing materials must be recycled in compliance with all applicable
regulations.
OPM_LPS_3UI_10K_20K_0US_V010.doc
Make use of the 2 adjustable foot, as
shown in the picture, in case you desire
to block the UPS on it's position.
A
The height can be adjusted with the 2
enclosed nuts "A", taking care however,
that the weight of the UPS remains on the
wheels.
Installation Guide LP 33 / 10 - 20 kVA
18/38
g