Screen Size Adjustment - Sanyo PLV-WF20 Owner's Manual

Screen Size Adjustment

1
Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame pointer
to the Screen Menu icon.
2
Use the Point ed buttons to move the red frame pointer
to the desired function and then press the SELECT
button.
Normal
Provide the image to fit the screen size while maintaining the
aspect ratio of input signal.
Zoom
Pan the horizontal direction of the image and cut the vertical
direction of the image to fit the screen size (16:9). Only for 4:3
video aspect ratio signals.
Natural wide
Modify the 4:3 aspect ratio image to fit the screen size (16:9
aspect ratio) by stretching the image to make it look natural.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be used
to provide the squeezed video signal at 16:9.
Full
Provide the full screen image.
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds. To display the
Aspect dialog box, press the SELECT button at Custom again
and then the Aspect dialog box appears.
Scale H/V .............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to "On, " the aspect ratio is
fixed. The "Scale V" appears dimmed and
becomes unavailable. Adjust "Scale H, "
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V .......... Adjust the Horizontal/Vertical screen
position.
Common .............. Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at "Yes. "
When Custom is selected, the saved scale
is used.
Reset .................... Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes. "
SCREEN MENU
Move the red frame pointer to the desired
function and press the SELECT button.
✔ Note:
• Zoom, Natural wide, and Wide cannot be
operated when "720p, " "1035i, " or "1080i" is
selected on AV System Menu (p.41).
Press the SELECT button at Common or
Reset, to display a confirmation box.
✔ Note:
• When no signal is detected, "Normal" is set
automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V
is limited depending on the input signal.
Video Input
Screen Menu icon
4