Installing & Cleaning Reusable Cloth Filter; Installing & Cleaning Foam Wet Filter - Vacmaster VOM205P Operator's Manual

INSTALLING & CLEANING REUSABLE
1
Installing Reusable Cloth Filter
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Remove power head and place in upside down position.
3. Slide reusable cloth filter down over the filter cage making sure the cage is completely covered.
(fig. 2 & 3)
4. Place and lock the power head onto the collection tank.
Removing and Cleaning Reusable Cloth Filter
1. With the removed power head in an upside down position, carefully remove the reusable cloth
filter from the filter cage. (fig. 4) Clean the filter by gently tapping or brushing dirt off. Cleaning
should not be done indoors in living areas.
2. Use a mild soap and water solution to wash reusable cloth filter and rinse with clean water. (fig. 5)
3. Allow the wet filter to air dry for 24 hours before installing onto the filter cage.
INSTALLING & CLEANING
1
Installing Foam Wet Filter
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Remove power head and place in upside down position. Follow instructions to remove cloth
filter.
3. Carefully slide foam wet filter down over the filter cage making sure the cage is completely
covered. (fig. 2 & 3)
4. Place the power head onto the collection tank.
Cleaning Foam Wet Filter
1. With the removed power head in an upside down position, carefully remove foam wet filter. (fig.
4)
2. Use a mild soap and water solution to wash foam wet filter and rinse with clean water. (fig. 5)
3. Allow filter to air dry before installing and using again.
CLOTH FILTER
2 3
FOAM WET FILTER
2 3
4
4
12
5
5