Rear Terminal - Sanyo PLC-XW50 Owner's Manual

Rear Terminal

q
SERVICE PORT
q
This jack is used to service the projector.
COMPUTER IN /S-VIDEO IN
w
/COMPONENT IN
Connect output signal from a computer,
RGB scart 1-pin video output, S-VIDEO
output, or component video output to this
terminal. (p.15-17)
MONITOR OUT
e
This terminal can be used to output the
incoming signal from COMPUTER IN/
S-VIDEO IN/COMPONENT IN terminal to
the other monitor. (p.15, 17)
AUDIO OUT (VARIABLE)
r
Connect an external audio amplifier to this
jack. (p.15 - 17)
This terminal outputs sound from AUDIO IN
terminal (t or u).
COMPONENT/ COMPUTER AUDIO IN
t
Connect the audio output (stereo) from a
computer or video equipment connected to
w to this jack. (p.15, 17)
w e
y
u
Part Names and Functions
t
r y
u
VIDEO IN
Connect the composite video output from
video equipment to VIDEO jack. (p.16)
AUDIO IN
Connect the audio output from video
equipment connected to w or y to this
jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p.16)
9