For Zooming In And Out The Images - Sanyo PLC-XW50 Owner's Manual

For zooming in and out the images

Digital zoom +
When the D.ZOOM + (
Menu disappears and the message "D. zoom +"
is displayed. Press the D.ZOOM
button to expand the image size. And press the Point
buttons to pan the image. The Panning
ed 7 8
function can work only when the image is larger than
the screen size.
Digital zoom –
When D.ZOOM – (
d
Menu disappears and the message "D. zoom –" is
displayed. Press the D.ZOOM
to compress image size.
This is used to reducing the size into original size.
To exit the Digital zoom +/– mode, press any button
except the D.ZOOM
ed
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment or select an input
source from the Input Source Selection (p.5) again, or
adjust the screen size with the D.ZOOM
) is pressed, the On-Screen
e
or the SELECT
e
) is pressed, the On-Screen
or the SELECT button
d
buttons, SELECT, and Point
buttons.
ed
Computer Input
Remote Control
Note:
✔
• T h e p a n n i n g f u n c t i o n m a y n o t
operate properly if the stored Mode
in the PC Adjust Menu is used.
(p.9)
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i,
575i, 480p, or 575p is selected in
the PC System Menu (p.6).
• Digital zoom +/- cannot be selected
when Full screen or True is selected.
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
33