Image Level Adjustment - Sanyo PLC-XW50 Owner's Manual

Image Level Adjustment

1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the Image Adjust Menu icon.
2
Press the Point
framed pointer to the item that you want to adjust,
and then press the SELECT button. The level
of each item is displayed. Adjust each level by
pressing the Point
Contrast
Press the Point button to decrease the contrast and
7
the Point button to increase contrast. (From 0 to 63.)
8
Brightness
Press the Point button to adjust the image darker
7
and the Point button to adjust the image brighter.
8
(From 0 to 63.)
Color temp .
Press the Point buttons to select the desired Color
7 8
temp. level. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point button to lighten the red tone and the
7
Point button to deepen the red tone. (From 0 to 63.)
8
White balance (Green)
Press the Point button to lighten the green tone and
7
the Point button to deepen the green tone. (From 0
8
to 63.)
White balance (Blue)
Press the Point button to lighten the blue tone and
7
the Point button to deepen the blue tone. (From 0 to
8
63.)
Sharpness
Press the Point button to soften the image and the
7
Point button to sharpen the image. (From 0 to 15.)
8
Gamma
Press the Point buttons to adjust the gamma value
7 8
to obtain better balance of contrast. (From 0 to 15.)
Reset
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments returns to their
previous figures.
buttons to move the
7 8
buttons to move the red
ed
buttons.
7 8
Computer Input
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Selected Image level
Press the Point
buttons to adjust the
value.
Note:
✔
After adjusting any of the White
balance Red, Green, or Blue, the
Color temp changes to "Adj.".
7 8
31