Image Level Adjustment - Sanyo PLC-XW50 Owner's Manual

Video Input

Image Level Adjustment

1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the Image Adjust Menu icon.
2
Press the Point
framed pointer to the item that you want to adjust,
and then press the SELECT button. The level
of each item is displayed. Adjust each level by
pressing the Point
Contrast
Press the Point
7
the Point button to increase contrast. (From 0 to 63.)
8
Brightness
Press the Point
and the Point
8
(From 0 to 63.)
Color
Press the Point
Point button to deepen the color. (From 0 to 63.)
8
Tint
Press the Point
(From 0 to 63.)
Color temp .
Press the Point
7 8
temp. level. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point
7
Point button to deepen the red tone.
8
(From 0 to 63.)
White balance (Green)
Press the Point
7
the Point button to deepen the green tone.
8
(From 0 to 63.)
White balance (Blue)
Press the Point
the Point button to deepen the blue tone.
8
(From 0 to 63.)
Note:
✔
• The Tint cannot be selected when the video
system is PAL, SECAM, PAL-M, or PAL-N.
• After adjusting any of the White balance Red,
Green, or Blue, the Color temp. changes to "Adj.".
38
buttons to move the
7 8
buttons to move the red
ed
buttons.
7 8
button to decrease the contrast and
button to adjust the image darker
7
button to adjust the image brighter.
button to lighten the color and the
7
buttons to obtain a proper color.
7 8
buttons to select the desired Color
button to lighten the red tone and the
button to lighten the green tone and
button to lighten the blue tone and
7
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Press the Point
buttons to adjust the
value.
Press the SELECT
button at this item to
display other items.
Press the SELECT
button at this item to
display previous items.
7 8