For Zooming In And Out The Images - Sanyo PLC-XU88 Owner's Manual

Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to "On," the aspect ratio is
fixed. The "Scale V" appears dimmed
and becomes unavailable. Adjust "Scale
H," then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ....... Adjust the Horizontal/Vertical screen
position.
Common ............ Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at "Yes."
When Custom is selected, the saved
scale is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes."

For zooming in and out the images

Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
"D. zoom +" appears. Press the SELECT button to expand
the image size. Use the Point
image. The Panning function can work only when the image
is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM button on the remote control.
▲
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
"D. zoom –" appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing the
D.ZOOM button on the remote control.
▼
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM buttons, SELECT, and Point buttons.
▲▼
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
29-30) again, or adjust the screen size with the D.ZOOM
buttons.
▲▼
8
buttons to pan the
▲▼◄►
Press the SELECT button at
Common or Reset, to display a
confirmation box.
Notes:
• When no signal is detected, "Normal" is set
a u t o m a t i c a l l y a n d t h e A s p e c t d i a l o g b o x
disappears.
• The adjustable range for Scale H/V and Position
H/V is limited depending on the input signal.
Remote Control
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
Notes:
• The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.34).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True, Full, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or
575p is selected in the PC System Menu
(p.31).
• Digital zoom +/- cannot be selected when
Full or True is selected.
Computer Input