How To Operate The On-Screen Menu - Sanyo PLC-XU88 Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
1
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.

Use the Point◄► buttons to select a Menu icon. Use
the Point ▲▼ buttons to select an item in the selected
menu.

Press the SELECT button to show the item data. Use
the Point ◄► buttons to adjust the values.
To close the On-Screen Menu, press the MENU button
again.
Note:
• The selected item is not active until the SELECT button
is pressed.
Top Control
POINT buttons
SELECT button
MENU button
Remote Control
MENU button
On-Screen Menu
Menu bar
Pointer (red frame)
Press the Point buttons
▲▼
to move the pointer.
Item
SELECT
button
Item data
Press the Point
◄►
the value.
Quit
Exit this menu.
POINT buttons
SELECT button
Menu icon
Pointer
(red frame)
buttons to adjust