Connecting To Component Video Equipment - Sanyo PLC-XU88 Owner's Manual

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cabels are not supplied with this projector.)
RGB Scart 21-
pin Output
Scart-VGA
cable
This terminal is switchable. Set up
the terminal as Computer2 input or
COMPONENT IN or Monitor output.
(See Page 50.)

Notes:
• When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
• See page 72 for ordering optional cables.
• RGB Scart signal cannot be output from the
MONITOR OUT terminal.
0
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component
cable
Component-
Audio cable
VGA cable
(stereo)
COMPUTER IN 2/ COMPONENT
IN / MONITOR OUT
Audio Output
COMPUTER/ COMPONENT
AUDIO IN
AUDIO OUT
(stereo)
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Installation
External Audio Equipment
Audio Input
Audio cable
(stereo)